Product Description
If you don’t have side-load, and an inline drive will do, we can do that! Rely on Hayes for a complete range of SAE flywheel stub shafts. We offer shafts to fit SAE 6-1/2, SAE 7-1/2, SAE 8 (Special Order), SAE 10, SAE 11-1/2, SAE 14 (Special Order)
- Custom shafts
- Standard SAE
- Tapered generator shafts
- Single bearing supports (Light Loads)
- Various sizes from 1-7/16″ to 2-1/2″
- Approved by many engine manufactures
- Very cost effective for in-line applications
Our stub shafts are used on Off-highway equipment such as;
- Chippers
- Band saws
- Compressors
- Stump grinders
- Concrete trowel
- Generators
- … and much more.
SAE Stub Shaft Selection
| SAE Flywheel | Shaft Diameter | Length | Part Number |
| 6-1/2 | 1-1/2 | 6″ | 26-01A51 (3D Model) |
| 6-1/2 | 1-3/4 | 6″ | 26-02A51 |
| 7-1/2 | 1-7/16 | 6″ | 26-0AA52 |
| 7-1/2 | 1-1/2 | 6″ | 26-01A52 (3D Model) |
| 7-1/2 | 1-3/4 | 6″ | 26-02A52 |
| 10 | 1-1/2 | 6″ | 26-01G54 (3D Model) |
| 10 | 1-3/4 | 6″ | 26-02G54 |
| 10 | 1-3/4 | 8″ | 26-02B54 |
| 10 | 2 | 6″ | 26-03G54 (3D Model) |
| 10 | 2 | 8″ | 26-03B54 (3D Model) |
| 11-1/2 | 2-1/4 | 6″ | 26-04A55 (3D Model) |
| 11-1/2 | 2-1/2 | 6″ | 26-05A55 (3D Model) |
